Hydraulic Hose Wire Spiral Winding Machine

Fast winding speed up to 80 rpm
Reverse winding
Stable spindle tension, protect the rubber hose body from compression and deformation
Wire breakage detection
Safe and enclosed operations
Door opening and shutdown protection detection

Tension control

The spindle tension is stable；
On machine preform, through two sets of rolling bolts, form different coil diameter and pitch；
Unique spindle structure, stable and low tension is obtained, protect the hose body from extrusion and deformation；
Wire splitting device, ensure standard winding angle and no wear of steel wire

Technological process

Servo control system through 4 + 1 + 1, ensure the accuracy and stability of travel；
Reasonable mounting base, ensure that the bobbin installation is convenient and fast.
Reverse winding process, it is easy to observe the situation of rubber tube wrapping when weaving.

Safeguard

Auto-Control

Setting up human machine interface；The control action of the whole machine is smooth, low failure rate；

Fast maximum speed up to 80 rpm
Reverse winding
Stable spindle tension, protect the rubber hose body from compression and deformation
Safe and enclosed operations
Door opening and shutdown protection detection
Wire breakage detection
Medium rubber film wrapping visible
Reverse winding, easy to observe the wrapping of the rubber hose during braiding

Model	Type	Optimal braiding diameter range	Rotation speed	Static state tension range	Power	Equipment and spindle specifications	Noise dBA
HSGC-30*4	Four Disk	3/8〞—1-1/4〞	80 rpm/m	7.5--15N/pcs	11KW* 4+4KW*2+3KW	1. 6 spool 1). Specification: 172mm × 82mm × 30.5mm 2). Single spindle capacity and wire carrying capacity weight: 550cm ³ And 3KG (the weight of total spindle wire carrying capacity is about 18kg);	70dBA
						2. 4 spool 1). Specification: 172mm × 82mm × 54mm 2). Single spindle capacity and wire carrying capacity weight: 970cm ³ And 5.35KG (the weight of total spindle wire carrying capacity is about 21.5kg);
						3. Machine production line specification: 13000mm * 2500mm * 2500mm
HSGC-30*6	Six Disk	3/4〞—2〞	80 rpm/m	7.5--15N/pcs	11KW6 +4KW2+3KW	1. 6 spool 1). Specification: 172mm × 82mm × 30.5mm 2). Single spindle capacity and wire carrying capacity weight: 550cm ³ And 3KG (the weight of total spindle wire carrying capacity is about 18kg);	70dBA
						2. 4 spool 1). Specification: 172mm × 82mm × 54mm 2). Single spindle capacity and wire carrying capacity weight: 970cm ³ And 5.35KG (the weight of total spindle wire carrying capacity is about 21.5kg);
						3. Machine production line specification: 18000mm * 2500mm * 2500mm